ASTM A802-19 PDF Download
Standard EN
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
Also Known As:
Abstract
This practice covers the standard acceptance criteria for the determination of surface texture, surface roughness, and surface discontinuities of steel castings by visual examination. The acceptance levels utilize the Steel Castings Research and Trade Association (SCRATA) graded reference comparators described as follows: Level A for surface texture, Level B for nonmetallic inclusions, Level C for gas porosity, Level D for solidification discontinuities, Level E for sand expansion discontinuities, Level F for metal inserts, Level G for thermally cut surfaces, Level H for mechanically prepared surfaces, and Level J for welded surfaces.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This practice covers the acceptance criteria for the surface inspection of steel castings by visual examination. Four levels of acceptance standards are provided.
1.2 Acceptance levels utilize Steel Castings Research and Trade Association (SCRATA)2 graded reference comparators for the visual determination of surface texture, surface roughness, and surface discontinuities described as follows:
Acceptance levels
A – Surface Texture
B – Nonmetallic Inclusions
C – Gas Porosity
D – Solidification Discontinuities
E – Sand Expansion Discontinuities
F – Metal Inserts
G – Thermally Cut Surfaces
H – Mechanically Prepared Surfaces
J – Welded Surfaces
1.3 Descriptions of terms related to casting discontinuities are in Section 2.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Descriptors | visual examination, chill test, , steel castings,Castings,Acceptance Criteria,Mechanical Test,Non-Metallic Inclusions,Porosity,Surface Roughness,Surface Texture,Visual Inspection |
| ICS Codes | 77.140.80 - Iron and steel castings |
| Language(s) | English |
| File Size | 61.4 KB |
