AS 1397:2011 PDF Download
Standard EN Sample
Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
Also Known As:
Specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.
Requirements for product conformity to this Standard are given in Appendix B.
Requirements covered in this Standard are as follows:
Formability grades of steel.
Structural grades of steel.
Classes of zinc coating, including differential coatings.
Classes of zinc coating converted to zinc/iron alloy.
Classes of zinc/aluminium coatings.
Classes of zinc/aluminium/magnesium alloy coating.
Classes of aluminium/zinc alloy coating.
Classes of aluminium/zinc/magnesium alloy coating.
Surface finish.
Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.
The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated.
Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.
Scope
This Standard specifies requirements for continuously hot-dip metallic coated sheet steel and strip supplied in thicknesses up to and including 5.0 mm.Requirements for product conformity to this Standard are given in Appendix B.
Requirements covered in this Standard are as follows:
Formability grades of steel.
Structural grades of steel.
Classes of zinc coating, including differential coatings.
Classes of zinc coating converted to zinc/iron alloy.
Classes of zinc/aluminium coatings.
Classes of zinc/aluminium/magnesium alloy coating.
Classes of aluminium/zinc alloy coating.
Classes of aluminium/zinc/magnesium alloy coating.
Surface finish.
Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.
The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated.
Within the description of the classes of coatings, the majority element present is listed first, followed by the next major element and followed by a third element if appropriate.
Details
History and complementary documents
History
| Edition | 6 |
| ICS Codes | 77.140.50 - Flat steel products and semi-products |
| Language(s) | English |
| ISBN | 9780733799259 |
| File Size | 440.3 KB |
Purchase
Right after completing the purchase process, you will immediately get a digital copy of this standard which is:
Not Locked
Printable
Multi-User
Scanned
$
33.00
